Binding.plastic

[GREGMW]

I have a Stewmac ooo kit,

In it I recieved 2 pieces of white platic binding about 1/4 inch wide for the sides, 2 pieces of very very fine white and 1 piece of very very fine black for the top.

I undestand how to route the edge etc and where they go,but how do I glue and fit the 3 fine ones together.

Do they all get stuck together first,then installed into the routed chanel.

Is there an easy way to do this ?

TIA

<I have tried to search the site but the search would not work for some reason>

[pmarlin]

I used the Binding Laminator from stew mac