hale88 Posted April 1, 2007 Report Posted April 1, 2007 (edited) I just put a new set of pickups in my project, but the volume and tone controls are screwed up. I followed the wiring diagram completely, I think. The volume only adjusts about halfway, from loudest to moderate. It doesn't shut the volume off completely. the tone seems to be working backwards also. I used the 500K pots from stew-mac. the ones with the long shaft. they were listed under specialty parts. Do I have the wrong pots? They say Alpha on the back if that helps. Edited April 2, 2007 by hale88 Quote
hale88 Posted April 2, 2007 Author Report Posted April 2, 2007 I thought of that, too. Just afraid to try it. I'll give it a try. thanks Quote
hale88 Posted April 2, 2007 Author Report Posted April 2, 2007 I went to guitarelectronics.com and used one of their diagrams. It worked! The diagram with the picups, now that I can sit back and look at it, didn't have a ground for the tone pot. I switched things around and ran a ground and finally it worked. Quote
GregP Posted April 2, 2007 Report Posted April 2, 2007 Sweet! Ain't it great when you fix your own stuff up? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.