blackmarketdonuts Posted May 31, 2007 Report Share Posted May 31, 2007 I know this has already been covered, but I cannot find a link to a tutorial that actually works. I want to install some LED's into a guitar I'm repainting and I need advice on how to wire it, put them in, etc., because I really don't know anything about this kind of thing. Thanks! Quote Link to comment Share on other sites More sharing options...
biliousfrog Posted June 3, 2007 Report Share Posted June 3, 2007 Firstly, you will need to remove the frets & fingerboard install the LED's &/or fiber optics, then replace the fingerboard, re-radius the board to get the LED's flush then refret. If it's only installing the LED's that you're not familiar with then by all means have a go but if you don't know anything about fretting or fixing necks I really wouldn't bother yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.