dawnofzion Posted August 3, 2007 Report Share Posted August 3, 2007 I am currently trying to figure out the neck angle on my current project, but I need the height of a standard TOM bridge. Does anyone have a number that is a standard number to go by that will allow for a little adjustments just in case it needs it? I have heard .625" but I want to be 100% sure that is correct. Thanks. Quote Link to comment Share on other sites More sharing options...
RAI6 Posted August 3, 2007 Report Share Posted August 3, 2007 The rule of thumb is: Figure out your measurements once you have all your hardware in your hands. Quote Link to comment Share on other sites More sharing options...
rubber314chicken Posted August 3, 2007 Report Share Posted August 3, 2007 The rule of thumb is: Figure out your measurements once you have all your hardware in your hands. defiantly, epically because there could be problems if your bridge is discontinued right before you order, and you aready cut the neck pocket. you can use .625 for a drawing (side elevation), but don't build on that measurement until you know it for a fact. changing a drawing is easy, changing a lot of work on your guitar isn't. Quote Link to comment Share on other sites More sharing options...
dawnofzion Posted August 3, 2007 Author Report Share Posted August 3, 2007 Ok thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.