ray Posted August 8, 2007 Report Share Posted August 8, 2007 building my 1st neck and getting ready to fret this stewmac board notice the slots are nearly double the depth of the tang the frets are stewmac also & far as i know standard, it look pretty much like any fretwire i got a couple of those fretboards and they have the same depth slots another thing i noticed is the fretboards are a lot thicker than what is on the warmoth necks by a good 1 to 1.5mm whats the go here ? do i need to sand the board down until the fret takes the full depth of the slot or should i bind the board? if the slots aren't filled with anything moisture would surel get in and pop the frets down the road a bit obviously i'm pretty much a newbie neck maker i have always bought in warmoth necks for previous builds Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.