frankthetank Posted May 23, 2008 Report Share Posted May 23, 2008 ok i need some info i need to know this before proceeding i stripped all the paint off a busted up guitar sanded it and im ready for sealer im not sure if i am through the old layer of sanding sealer. how can i tell?. and if im not through will it still finish or do i need to resand Quote Link to comment Share on other sites More sharing options...
avengers63 Posted May 23, 2008 Report Share Posted May 23, 2008 It depends a little on what type of finish you'll be applying. If you'll be painting it, it won't matter much. If you'll be staining or dying the wood, that needs to happen before the sealer. If you're just doing a natural finish... I'd rather let one of the more experienced guys handle that one. EDUCATED GUESS: And that's ALL this is. Don't take this as anything other than my gut instinct. It would seem to me that it'd be fairly easy to tell if you're through the sealer ot not. The sealer makes it look wet, just like clear finish. I'd say that if anything still looks wet, you're not through. Also, I wouldn't think putting new sealer over any leftover sealer would hurt anything. BUT - you shouldn't mix finish types when possible, so if different things were used to seal.... I don't know. Sealer can be lacquer, shellac, or possible something else. I know you can use shellac to seal then put something else over it, and lacquer is it's own sealer... Anyone else? Quote Link to comment Share on other sites More sharing options...
frankthetank Posted May 25, 2008 Author Report Share Posted May 25, 2008 It depends a little on what type of finish you'll be applying. If you'll be painting it, it won't matter much. If you'll be staining or dying the wood, that needs to happen before the sealer. If you're just doing a natural finish... I'd rather let one of the more experienced guys handle that one. EDUCATED GUESS: And that's ALL this is. Don't take this as anything other than my gut instinct. It would seem to me that it'd be fairly easy to tell if you're through the sealer ot not. The sealer makes it look wet, just like clear finish. I'd say that if anything still looks wet, you're not through. Also, I wouldn't think putting new sealer over any leftover sealer would hurt anything. BUT - you shouldn't mix finish types when possible, so if different things were used to seal.... I don't know. Sealer can be lacquer, shellac, or possible something else. I know you can use shellac to seal then put something else over it, and lacquer is it's own sealer... Anyone else? thx for the help it will be painted i just want it to look good and do it right someof the finished products i have seen from others look horrible but i think they just couldnt wait and take their time Quote Link to comment Share on other sites More sharing options...
syxxstring Posted May 27, 2008 Report Share Posted May 27, 2008 The most important part if your painting is all the work before you paint. Especially level sanding the primer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.