andy_jensen14 Posted August 11, 2008 Report Share Posted August 11, 2008 I know you probably think im stupid for asking this but do you have to sand in between coats of nitrocellulose lacquer? Quote Link to comment Share on other sites More sharing options...
John Abbett Posted August 11, 2008 Report Share Posted August 11, 2008 You don't have to. It will be soft, so you would have to let it cure before sanding between coats. Would take a while. I would only sand if you got something in your finish you need to sand out. Put on several coats, let it cure well. (Could take a couple of weeks or more depending on climate) and then sand. -John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.