HuntinDoug Posted January 6, 2009 Report Share Posted January 6, 2009 Well...Time to clear out the shop. These are all "back burner" projects that will never happen. Email me if interested: doug@parableguitars.com 25 fret, 25.5" scale bound maple board w/ oak leaf pearlessence inlay. I was saving this for a future acoustic build. It's bound with an abalone looking binding. Kinda "woodsy" looking. 16" radius $60 + shipping 25 fret, 25.5" scale African rosewood board with indian rosewood Iommi cross inlays. The board is tapered. Sorry for the bad pic. $60 + shipping http://www.parableguitars.com/forsale/2.jpg 24 fret, 25.5" scale Macassar ebony board with pearlessence "bloody sharkfin" inlays (not yet glued in). This is the prototype I recently did for the Jackson CS 12 pice run. $80 + shipping http://www.parableguitars.com/forsale/3.jpg Import mahogany set neck. Gibson scale & HS. Neck has binding & nut installed. I have 2 of these. The heel is slightly off center, but it's still useable. These would be great for someone wanting to start thier first project. $50 each + shipping http://www.parableguitars.com/forsale/4.jpg Quote Link to comment Share on other sites More sharing options...
Kenny Posted January 6, 2009 Report Share Posted January 6, 2009 ~looks in wallet for 60 bucks~ i want the "woody" looking one Quote Link to comment Share on other sites More sharing options...
HuntinDoug Posted January 6, 2009 Author Report Share Posted January 6, 2009 SOLD! to the gentleman from California ( my Paypal is huntindoug@aol.com ) Quote Link to comment Share on other sites More sharing options...
Kenny Posted January 7, 2009 Report Share Posted January 7, 2009 (edited) i feel like a shmuck...i couldnt find 60 bucks...hahaha however if i could just sell some sand dollars.... Edited January 7, 2009 by Kenny Quote Link to comment Share on other sites More sharing options...
HuntinDoug Posted January 7, 2009 Author Report Share Posted January 7, 2009 No problem Kenny....Save your $$ for the CNC. Here is an additional pic for those who have PM'd me: Quote Link to comment Share on other sites More sharing options...
westhemann Posted January 7, 2009 Report Share Posted January 7, 2009 Just FYI doug...the import set necks are off center on purpose...those look like the same necks they use on Agile guitars,and they center them offset I guess to provide more wood at the cutout area... I took an agile apart a year or so ago and I have seen all that up close. Quote Link to comment Share on other sites More sharing options...
John Abbett Posted January 7, 2009 Report Share Posted January 7, 2009 I bought and installed one of those about a year ago, it was a decent neck for the price. The offset isn't a problem if you have the neck in hand before you lay out the neck pocket. -John Quote Link to comment Share on other sites More sharing options...
HuntinDoug Posted January 8, 2009 Author Report Share Posted January 8, 2009 Thanks for the info guys Both of these necks are sold... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.