Jump to content

Pick-up Placement


Recommended Posts

good one dpm99 but i have not pick a pair of pick-ups yet say that fast five times but really i am try to get a older sound vintage any ideas

If you mean that older, clean, jazzy sound, you might try one of those floating neck pickups that strap onto the end of the neck, or there's another type that mount on the pickguard. These leave the guitar's top intact (no holes or extra mass) for maximum acoustic sound which when amplified via a floating pickup, gives a distinct authentic sound.

Link to comment
Share on other sites

good one dpm99 but i have not pick a pair of pick-ups yet say that fast five times but really i am try to get a older sound vintage any ideas

If you mean that older, clean, jazzy sound, you might try one of those floating neck pickups that strap onto the end of the neck, or there's another type that mount on the pickguard. These leave the guitar's top intact (no holes or extra mass) for maximum acoustic sound which when amplified via a floating pickup, gives a distinct authentic sound.

sorry dpm99 i didn't mention that i am building an electric guitar my mistake

Link to comment
Share on other sites

Pickups should be placed at a Harmonic, to find the harmonic, mesure the distance from the nut, to any fret, and mesure that same distance from the bridge...That will be Your pickups new home

Thanks zayk that is exactly what i was looking for thanks again steveco

No problem! Post it when its done :D

Link to comment
Share on other sites

Pickups should be placed at a Harmonic, to find the harmonic, mesure the distance from the nut, to any fret, and mesure that same distance from the bridge...That will be Your pickups new home

I don't think this is good information. I have some questions to help you clarify:

1: If I measure the distance from the nut to the 4th fret I can't measure that same distance to the bridge. Why not?

2. Which harmonic? The open string harmonic or a fretted note harmonic?

3. If he's using a humbucker which coil sits at the harmonic?

4. What about intonation, will that screw up an ideal harmonic placement?

5. How did you come to your conclusions zayk?

~David

Link to comment
Share on other sites

Pickups should be placed at a Harmonic, to find the harmonic, mesure the distance from the nut, to any fret, and mesure that same distance from the bridge...That will be Your pickups new home

I don't think this is good information. I have some questions to help you clarify:

1: If I measure the distance from the nut to the 4th fret I can't measure that same distance to the bridge. Why not?

2. Which harmonic? The open string harmonic or a fretted note harmonic?

3. If he's using a humbucker which coil sits at the harmonic?

4. What about intonation, will that screw up an ideal harmonic placement?

5. How did you come to your conclusions zayk?

~David

hey myka i came to simular conclutions after thinking about what dpm99 said just as you i think some things were left out of the picture thanks for the info any other thoughts would be welcome thanks again steveco

Link to comment
Share on other sites

Hey David, if you happen to run across this thread again, I'd love to hear your methods for determining pickup placement.

Actually I don't give it that much thought honestly. I put the neck pickup right up against the fingerboard and the bridge pickup about 1.25" forward of the bridge to the center of the closest coil. This gives as much room in between the pickups as possible so that the pickups aren't in the way of my pick! I do like the sound of a neck pickup on a 22 fretter better than a 24 fretter. So I suppose I could say that I like the neck pickup to be as close to the center of the string as possible to pickup the most movement (translate: fuller sound).

I am totally intrigued by the work of Michael Stevens. His LJ model has slanted pickups in the bridge and neck to make (my assumptions here) the high notes fatter and the bass nice and tight. I like it! Would love to play one and see what it does to the tone.

~David

Edited by Myka Guitars
Link to comment
Share on other sites

Hey David, if you happen to run across this thread again, I'd love to hear your methods for determining pickup placement.

Actually I don't give it that much thought honestly. I put the neck pickup right up against the fingerboard and the bridge pickup about 1.25" forward of the bridge to the center of the closest coil. This gives as much room in between the pickups as possible so that the pickups aren't in the way of my pick! I do like the sound of a neck pickup on a 22 fretter better than a 24 fretter. So I suppose I could say that I like the neck pickup to be as close to the center of the string as possible to pickup the most movement (translate: fuller sound).

I am totally intrigued by the work of Michael Stevens. His LJ model has slanted pickups in the bridge and neck to make (my assumptions here) the high notes fatter and the bass nice and tight. I like it! Would love to play one and see what it does to the tone.

~David

sounds like two opinions to me steveco thanks guys

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...