Jump to content

Towner - A Bigsby Retrofit Kit


Recommended Posts

What do you think of my kit.

http://www.townerusa.com/

I have invented a kit that alleviates the guitar owner from drilling holes in the body of the guitar when installing a Bigsby vibrato. The top part of this kit can fit any Gibson guitar because the bolt holes are the same in all of their electric guitars.

This kit is mounted in place of of the stop tailpiece with the existing bolt holes. Rested over the strings, and applying the necessary down tension needed per the height adjustment of the bolts.

This kit can be adjusted to whatever height you want and or need to accommodate the action of your strings & bridge height. It can be canted, per the adjustment of the bolts, so there is an even amount of tension over the strings.

Other important information to know about this kit. I used a Bigsby B3 with a Tune-O-Matic Schaller Roller Bridge on a Gibson ES-335.

It can accommodate Gibson, Epiphone or Ibanez Guitars:

Les Paul models

Archtop models

SG models

http://www.townerusa.com/

YouTube- Towner - Bigsby Vibrato Retrofit Kit

Towner USA Bigsby B3 Vibrato Retrofit Kit Gibson ES 335 Les Paul SG Archtop Ibanez Epiphone Guitar Guitars

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...