Ripthorn Posted October 6, 2011 Report Share Posted October 6, 2011 I'm going to be building a bass neck for a guy here at work and I will be using a preslotted board from stewmac as I don't have bass scale fret slotting templates. However, the radius on their boards is 16" and I need 12". So I am thinking of re-radiusing the board. Has anyone tried? Is there enough material to do so? I'm not worried about the slots, as I can cut them deeper if need be. I'm just curious to know if there is enough wood to put a smaller radius on one of these. Quote Link to comment Share on other sites More sharing options...
LightninMike Posted October 6, 2011 Report Share Posted October 6, 2011 You would be surprised at how little is actually going to be taken off.... no worries... go for it... just take your time and you will see that it is pretty much what you would have gotten from them had the order been different now, going from 12 to 16, that would take off more Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.