theodoropoulos Posted January 26, 2013 Report Share Posted January 26, 2013 Hi! i am planing my new telecaster but i have a problem with electronics,I don't like 5 way switches in Tele so i want to make with 3 way and a mini switch on/on/on the same as this diagram...can anyone help me? Quote Link to comment Share on other sites More sharing options...
Tim37 Posted January 26, 2013 Report Share Posted January 26, 2013 i would use push/pull pots and wire it like this. start with a standard tell wired with a 3way switch use one push pull pot as a series parallel for the humbucker. then use the other push/pull to swap the phase on the neck pickup. that should give you. 1 bridge series 2 bridge parrallel 3 neck 4 neck, bridge series 5 neck, bridge parallel 6 neck, bridge series out of phase 7 neck, bridge parallel out of phase Quote Link to comment Share on other sites More sharing options...
theodoropoulos Posted January 26, 2013 Author Report Share Posted January 26, 2013 (edited) thank you !!! its ,my fault!!!i did not say that ii want to use only single coil !and not humbucker... this is the right! Edited January 26, 2013 by theodoropoulos Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.