Jump to content

Tone control no sweep, a little like a switch !!


Recommended Posts

Hi gents/ ladies

This is my first attempt at anything like this so I simply bought a cheapo Chinese Firebird kit. I was not expecting too much but it appears to be a good little project.

Ive just completed the wiring as per attached diagram if uploaded correctly. 2 mini humbuckers, 2 vol and 2 tone etc. All values are as per diagram.

Sounds way better than expected through my Peavey 6505 plus. Trouble is both tones appear to be either on or off....no sweep at all. When at 0 tone as expected then rolling on etc about 3 to  4ish it all comes in with no further noticeable change through the rotation of the knob. Any pointers to correct the issue would be greatfully received. ?


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...