What are some essential tools and hardware I need for a neck build?

[PRSpoggers]

Hey y'all, this is my first time building a neck and I am going to start the build after Christmas (when I get some tools I am getting for Christmas) and here is my layout basically:

For the neck I am using White Limba. For the fingerboard I am using Honduran rosewood. I think both of these need to be planed and dried before use. I am on day 12 of drying both of these. I need to plane these but I don't know where to get them planed at.

I am going to be using a strat template from StewMac as a my neck shape. 

I have a general idea of what tools I need:

• Bandsaw, for cutting the wood to rough shape
• Router, for the truss rod cavity
• Wood glue for gluing the fretboard
• Spokeshave for shaping the neck
• Saw rasps for shaping the neck as well

I have radiusing blocks and sandpaper and things like that. Is there anything else I need for this project?

[Bizman62]

If you get the Shinto Saw Rasp you won't need a spokeshave to remove material. It's one of the fastest hand tools for that purpose.

For planing you need a plane. A long sharp hand plane would be ideal.

[PRSpoggers]

Just now, Bizman62 said:

If you get the Shinto Saw Rasp you won't need a spokeshave to remove material. It's one of the fastest hand tools for that purpose.

For planing you need a plane. A long sharp hand plane would be ideal.

So a rasp would be the better route for me? Those hand planes are in my budget! Is there anything else I need for this?

[Bizman62]

6 minutes ago, PRSpoggers said:

Is there anything else I need for this

Lots of patience.

View these two, they're about a bass but the idea is the same. There's many other ways as well but the facet method for shaping in Ep. 3 is a very good way to achieve a fine result.