David Ivy Posted March 27, 2022 Report Share Posted March 27, 2022 I have been busy building my own original design. I built a prototype and some musician friends of mine really liked the look and playability of it. I took thing that I liked from guitars that I play and combined them to make something a little different than I could buy. I used 2 pieces of poplar for the body blank with a strip of red oak down the middle. The neck was made from mahogany with a piece of walnut for the fretboard. It has a 12 inch radious with 24 & 3/4 scale With medium nickel frets. A hardtail bridge a set of Grover tuners and a soundfondry humbucker pickup. 1 volume & 1 tone control. 3 Quote Link to comment Share on other sites More sharing options...
Andronico Posted March 28, 2022 Report Share Posted March 28, 2022 Hello, interesting design, congratulations !! I noticed that you have 23 frets but have enought place for 24, Is there any reason (other than your taste) to not have a complete 2 octaves ? Keep the good work. Quote Link to comment Share on other sites More sharing options...
David Ivy Posted March 28, 2022 Author Report Share Posted March 28, 2022 @Andronico thank you very much. I just decided on 23, there was no particular reason. I appreciate the feedback. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.