scorpionscar Posted March 1, 2023 Report Share Posted March 1, 2023 Hi folks, I`m restoring a double neck guitar. In the control cavity there is a yellow cable (red, white and bare). Red and white are connected to the switch and bare to ground. In the other compartiment, the yellow wire with the red and white, the white goes to the center lug of the pot volume but the red one (which I'm holding in my fingers in the pic) is not connected to anywhere. The black wire (with red and white too) follows the same pattern and both white and red are connected togueter in the switch and in the pot lug. My question is where do I solder the red wire I'm holding in my fingers. Thanks in advance. Scorpionscar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.