jalopyguitarist Posted July 26, 2004 Report Share Posted July 26, 2004 Is it possible to completely strip a set neck guitar? I want to strip the wine red finish from the body and neck of my Epiphone Les Paul - What would I need to finish the guitar with after to stop the wood warping? Quote Link to comment Share on other sites More sharing options...
Morben Guitars Posted July 26, 2004 Report Share Posted July 26, 2004 Yes it's possible. For best results you'll remove the neck and finish it seperatly. If you're unfamiliar with guitar finishing, read up here: http://www.reranch.com/ If you're unfamiliar with any wood finishing, I'd suggest buying an inexpensive "kit" guitar and working on that first. Oh, and WELCOME TO THE CLUB! Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted July 26, 2004 Report Share Posted July 26, 2004 You mean something like this Just sand it, the stain goes deep, so be prepared to sand a while, and don't use power tools unless you have one like Guitarfrenzy does, the one with 3 round mini disks. What are your intentions, just the neck or the whole thing? If is the whole thing check the SG here , if it's the neck just sand. And I would have suggested to sand the whole guitar too, I don't like those chemical strippers for wood, but if thats all you have OK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.