GREGMW Posted August 1, 2004 Report Share Posted August 1, 2004 Hi, Finally I am about to route the trench for a " Stewmac Hot Rod" truss rod which will have the adjustment at the body end under the PU. Should I make the length of the cut exactly the same as the length of the truss rod blocks so it cant move back and forwards in the trench or should I give it a bit of clearance ? Should I bring the adjusting screw (hex screw) out beyond the end of the neck into the body or leave it flush with the end of the neck? tia Greg Quote Link to comment Share on other sites More sharing options...
litchfield Posted August 1, 2004 Report Share Posted August 1, 2004 Just long enough and flush. Check Stewmac installation guide Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.