Jump to content
Entry in the May 2024 Guitar of the Month contest is now open ×

BJPUC

Established Member
 View Profile  See their activity

  • Posts

    146

  • Joined

  • Last visited

 Content Type 

Everything posted by BJPUC

  1. BJPUC
    hey guys, my problem is...when i was given the S.D. hotrail pup, all the wires were gone. I mean nothing! what a headache, at least they were cleanly removed....anyhoo....can anyone give me some insight on rewiring it...and FYI i dont want any coil taping, splitting etc...just a straight pup! thanx !!!!!!!!!
  2. BJPUC
    LMAO!!!!!!!
  3. BJPUC
    That is a wonderful guitar!!!!!!! love the grain on the back!!! Neck is quite nice too....might need some pointers on that!
  4. BJPUC
    thanx so much!!!!
  5. BJPUC
    Where can i get a Spokeshave, and are there different kinds....and what is the most useful, etc....... thanks so much.... I have access to Home Depots and Lowes, and a few mom and pop type places...... gots to love KY! thanx
  6. BJPUC
    i have a bench top delta and love it...its a workhorse!
  7. BJPUC
    i personally would suggest a maple or mahogany. And for pickups,....wilkenson bridge tele in the middle pos. and S. Duncans or Dimarzio in the bridge and neck pos. just my two cents
  8. BJPUC
    depends on what kind of look and sound and feel your going for...I like all types, but i play a variety of styles of music....are you going to paint it, stain it etc>?
  9. BJPUC
    can ya get something that looks like platinum?....what about hematite?
  10. BJPUC
    good point....I think there is a silver based solder. that could work?
  11. BJPUC
    i wonder if you could use pieces of aluminum or copper or any metal you can get really thin???? just a thought. Solder would be cool....can it be sanded?
  12. BJPUC
    Klean-Strip Antique Stripper has given me the best luck....i stripped close to 20 bodies with it....some it would eat all the way down too the wood...others it would take the clear coat and color off well, and then i power sand the top and back and hand sand the sides. hope that helps ya...i use the spray can version.
  13. BJPUC
    thanx for the info!!! will try!
  14. BJPUC
    reminds me of an ibanez...but alot of the ibanez basses are not wood if im correct....please someone correct me if im wrong....i think the ergodyne series is a composite powder thingy.
  15. BJPUC
    I would wait just to be safe.
  16. BJPUC
    what brand urethane did you use?
  17. BJPUC
    From the looks of the body, which is great looking, you do not need to fill any grain! If I understand correctly you only need grain filler and/or wood filler on deep gashes or abnormalities in the wood. Hope you project goes well!!! BJ
  18. BJPUC
    what are some good brands of grain filler i can find here in the states???sorry to keep dragging this on! thanx
  19. BJPUC
    I was gonna ask a similar question. And I have resources like Home Depot, Wal-Mart...etc......Any Help?????
  20. BJPUC
    I had great luck stripping a tung-oil finish with Acetone and 000 and 0000 Steel Wool. I was satisfied after about an hour of rotating between the two. And Brian i am off tour for the winter bj
  21. BJPUC
    Yeah i was gonna ask a similar question.
  22. BJPUC
    thank you,,,,,and i told him it would line up different....but he wants it that way! ill let ya know
  23. BJPUC
    yes it is a fender replacement pickup
  24. BJPUC
    I had a friend come to me with an active jazz bass pickup...i need to figure out how to wire it into a L P style guitar..i told him it would sound different ,.,,,but that is what he wants. Any help about this is greatly appreciated. thanx BJ
  25. BJPUC
    I can't seem to get the bass to except an oil based stain do I need to use a water based stain or an oil based stain in combination with something else. There is no clear coat, the bare wood has only been waxed....please help
×
×
  • Create New...