Tim37

In my head I'm envisioning a g&l z coil split with volumes on each leg.  It should be doable it would wire like a LP with independent volumes in the middle position

Make sure however you print it that the ink is UV stable it would suck to have a photo fade after all that work

A pic of your wiring might help find any mistakes

20 minutes ago, Prostheta said:

 

Some people swear it makes a difference (but bring no proof to the table) whilst others swear it doesn't (likewise). I imagine that the only difference it might make is if the pickup is slightly microphonic....

It makes a huge difference when you are calculating how deep to rout.

I would suggest building an electric to start with the body for an acoustic can get fairly involved.  Just my opinion

Can you post a pic similar to your end goal. 

Sounds nice kind of a mid level kit that would allow for different unique body shapes.

Typical bass player, doesn't even know how to hold his instrument. 

Guitar fetish had some trems that looked like those old japanese ones at one time

The Constitution looks like tiesco.

Did you check the "dead" pickup with your meter?  Pickups don't just go out its usualy a switch, pot ,bad connection.  

You have indeed standed through the finish the "rings" are the different layers.  

And I agree with kill unless you are doing some sort of vintage correct or restore job.  Nitro isnt worth the time or effort just to get a fragile subpar finish

Man you have done a nice job of resurrecting that beast.  Did you rebuild then neck also?

Scrible a illegible  signature on it and hang it on the wall

What Curtis said,   check out guitar fetish they have some decent pickups and other non critical hardware.

I would try using carbon fiber cloth then use resin to adhear it to the plexi. 

So what are you wanting to know about the guitat, that bonedaddy couldn't tell you?

Mathew may have been the original owner.   The custom luitherie business is though in the best of economy's. Bone daddy may have packed up shop years ago.

Sounds like it worked out best for you.  If the guy dumped the build over binding he sounds like he would have been a pain to work with.

. I found this on wikapedia they claim its a 63

Maybe dye some maple.

Sounds like you got it. If you lower the neck the bridge will need to drop a equal amount.

I did this once years ago I took a piece of scrap clamped it to the body then used a laminate trim bit in my router to make a template.  Then I swapped the bit to the type with the bearing at the top set my depth and routed the pocket it worked out nice.

Do your tracing or sketch on a piece of graph paper this will allow you to get mor accurate x&y coordinates.  Plot as many points as possible the connect your arch's using those points.

Not as cool as the other stuff posted but heres mine. 

The teisco is kinda suprising if I where to toss some decent tuners on it I would have decent guitar.  It has a nice raunch blues tone to it.

The wah is a old Thomas organ I got it as a lot of 3 or 4 non working Crybaby's of various years it does truely have a different tone its much more mellow than the newer versions.  

And then the case it's a old vox case and of it wasn't such a wreck it might be worth something.

Edit:  I somehow uploaded the car and can't delete it if a mod sees fit I would love it to be deleted

<pros: suck it up. the car stays! haha>

Would a  eq pedal on the b output achieve what your wanting.