asm Posted August 5, 2004 Report Share Posted August 5, 2004 whats a good hp for a plunge router, ill be doing pretty dense woods (rosewood, wenge, ebony, ect). taking alot of wood out in a single pass wont be to important though. ill be taking my time. thx for any help. t Quote Link to comment Share on other sites More sharing options...
westhemann Posted August 5, 2004 Report Share Posted August 5, 2004 i use a 1 hp and it works fine with good bits and shallow passes...ANY router is a 2 handed machine though...don't even take one hand off to wipe sweat from your eyes...wear a bandanna instead Quote Link to comment Share on other sites More sharing options...
guitar_ed Posted August 6, 2004 Report Share Posted August 6, 2004 As Wes said, 2 hands. I also use a full face shield and stop often to check my work and clean a bit, and move my clamps. Guitar Ed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.