Series/off/parallel

[brunomendez]

HI, again!!! here I am with new questions.....sorry guys!! me dumb!!!

How do i wire a switch in order to get series/off/ parallel!! But, in position 2(off), get the 2 hot wires from both pickups!!!!

In this wirins we have 2 wires before and 1 after, in any of 3 positions, but i want 2 wires after! one of the hot (normal) is in all positions and the second only work in position 2 (off)

With a draw is better to explain, but i don´t know how to post it

position 1 ___series___series____ 1 wire

position 2 ____________________ 2 wire with no touch between them

###### ____________________

position 3 _______parallel_______ 1 wire

######### /__parallel__/

note: (#####) just to put the lines forwards, not for the drawing

Got the idea???

so what should i do???

Is it possible??

Thanks

bruno

[lovekraft]

Take a look here:

Humbucker Mods

Right hand column, third down from the top (and read the note at the bottom of the picture).

<edited for typos>

Edited December 20, 2004 by lovekraft

[brunomendez]

hi,

lovekraft, i saw it, but now how do i get the hots from both pickups in split ways, like i putted in the drawing!!

its for that stereo/mono circuits!! mono in series parallel and stereo in off position!!

but i think i can´t get this wiring!! the hots will always be in contact!!

thanks

bruno

[lovekraft]

No, it's going to take a 4 pole switch to get what you're looking for -sorry!

[brunomendez]

hummm!!! ok no problem, but how do i wire it???

sorry to keep bothering you!!!

bruno