erikbojerik Posted December 26, 2004 Report Share Posted December 26, 2004 I ran into some very nice (free!) walnut, looks like nearly an entire tree trunk! Some of this I'll be using to make a 335-style semi-hollow. Does anyone have the body dimensions for the Gibson 335? I'm looking for: lower bout width upper bout width waist width tailpiece to end length thickness (edge & @ bridge) Thanks in advance Quote Link to comment Share on other sites More sharing options...
KeithHowell Posted January 3, 2005 Report Share Posted January 3, 2005 Download my drawing for the ES335 from the download area you will be able to get all the measurements from it. Keith Quote Link to comment Share on other sites More sharing options...
idrum4food Posted January 3, 2005 Report Share Posted January 3, 2005 Would like to see your progress on this project. I've always wanted to start a semi project. Quote Link to comment Share on other sites More sharing options...
KeithHowell Posted January 4, 2005 Report Share Posted January 4, 2005 Would like to see your progress on this project. The drawing is my progress so far on this project. I've been to busy finishing off a bass and setting up my acoustic which I rebuilt recently. I've just started laminating the sustain block. I will take some pictures and post as I go. Keith Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted January 4, 2005 Report Share Posted January 4, 2005 what download area? where do I go see it? Quote Link to comment Share on other sites More sharing options...
Maher Posted January 4, 2005 Report Share Posted January 4, 2005 you have to donate Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted January 4, 2005 Report Share Posted January 4, 2005 o ok Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.