Rones Posted May 6, 2005 Report Posted May 6, 2005 This one I haven't had before... Wired up a five way strat selector with two HB, both with 4 way wire to split the coils. Postions 1 is the Bridge, Position 2 is the bridge/neck, Postion 3 is the neck, 4 is the neck split, 5 is the birdge split. Problem is, everything is working except position 1! thought maybe it was soldered poorly, but it checks out with an ohm tester. switched around the bridge and neck to test again, once more, no sound in position 1! Ever come across this? I used the diagram from the project guitar wiring tutorials. Could it be a bad switch? Thanks Rones Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.