silvertonessuckbutigotone Posted June 28, 2005 Report Share Posted June 28, 2005 (edited) I searched for the old topic but I couldn't find it. So sorry to the mods. My plan was to make an upside down RR copy with 2 Humbuckers an on and off switch, and no knobs. That has changed a little bit. It's going to be 2 HB, and one single coil. Each pickup will have an on and off switch (these switches will be placed out of the way on the side)and a master switch (placed by the knobs like an SG) and 4 volume knobs (each pickup plus one master volume), these knobs will be placed on the top like a LP or SG would have them. The guitar is going to have a mahogany body with a flame maple veneer dyed blood red with back sides and back. A maple/purpleheart laminate will be what the neck is made out of, with a rosewood fingerboard (24 3/4" scale) with a guitar pick inlayed across the 11th, 12th, and 13th fret and white side markers. The bridge will be a black TOM wraparound tailpeice. I'm not sure about strap buttons yet. The neck will be bolt on. thats the virtual pic of it. (crappy imitation of the pick inlay) heres the body about a third through the sanding of the edges. I never knew it took this long to get it flush and even. http://img.photobucket.com/albums/v461/gle...ai/DSCN0162.jpg heres the pics of the wood for the neck, and the pre slotted fingerboard from stewmac: http://img.photobucket.com/albums/v461/gle...ai/DSCN0163.jpg http://img.photobucket.com/albums/v461/gle...ai/DSCN0164.jpg any suggestions, comments, questions etc. are welcome. Edited June 28, 2005 by silvertonessuckbutigotone Quote Link to comment Share on other sites More sharing options...
joeguitar1954 Posted June 28, 2005 Report Share Posted June 28, 2005 I searched for the old topic but I couldn't find it. So sorry to the mods. My plan was to make an upside down RR copy with 2 Humbuckers an on and off switch, and no knobs. That has changed a little bit. It's going to be 2 HB, and one single coil. Each pickup will have an on and off switch (these switches will be placed out of the way on the side)and a master switch (placed by the knobs like an SG) and 4 volume knobs (each pickup plus one master volume), these knobs will be placed on the top like a LP or SG would have them. The guitar is going to have a mahogany body with a flame maple veneer dyed blood red with back sides and back. A maple/purpleheart laminate will be what the neck is made out of, with a rosewood fingerboard (24 3/4" scale) with a guitar pick inlayed across the 11th, 12th, and 13th fret and white side markers. The bridge will be a black TOM wraparound tailpeice. I'm not sure about strap buttons yet. The neck will be bolt on. thats the virtual pic of it. (crappy imitation of the pick inlay) heres the body about a third through the sanding of the edges. I never knew it took this long to get it flush and even. http://img.photobucket.com/albums/v461/gle...ai/DSCN0162.jpg heres the pics of the wood for the neck, and the pre slotted fingerboard from stewmac: http://img.photobucket.com/albums/v461/gle...ai/DSCN0163.jpg http://img.photobucket.com/albums/v461/gle...ai/DSCN0164.jpg any suggestions, comments, questions etc. are welcome. ← That's cool.. I used to have a hondo that was a reverse Randy V. Had a Kahler and grovers on it I think, with a white finish and black pinstripes. Quote Link to comment Share on other sites More sharing options...
GregP Posted June 28, 2005 Report Share Posted June 28, 2005 I don't like the concept of the electronics setup, but that's completely subjective and personal. Other than that, I never thought an upside down RR V would look any good, but it does! I like it. Greg Quote Link to comment Share on other sites More sharing options...
Duff Beer Man Posted June 28, 2005 Report Share Posted June 28, 2005 Do u guys just use photoshop to create those Virtual designs? Quote Link to comment Share on other sites More sharing options...
sepultura999 Posted June 28, 2005 Report Share Posted June 28, 2005 Won't that feel a bit unbalanced? It does look nice. Quote Link to comment Share on other sites More sharing options...
n8rofwyo Posted June 28, 2005 Report Share Posted June 28, 2005 I'm with Duff Beer Man (OOOHHH YEAH). What software are you using to pattern those guitars with? TIA, Nate Robinson Quote Link to comment Share on other sites More sharing options...
silvertonessuckbutigotone Posted June 28, 2005 Author Report Share Posted June 28, 2005 http://www.nymphusa.com/kisekae/kisekaeE1.asp i just put everything I wanted on, then took it to photoshop and put in the pic inlay and flipped it around. Quote Link to comment Share on other sites More sharing options...
AlGeeEater Posted June 28, 2005 Report Share Posted June 28, 2005 (edited) http://projectguitar.ibforums.com/index.ph...14819&hl=upside Try harder next time Edited June 28, 2005 by AlGeeEater Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.