possum1284 Posted November 4, 2005 Report Share Posted November 4, 2005 im selling an sg project, the body and neck were carved out of a single piece of mahogany. sg body link the body needs to be routed as wellas the neck, have a fingerboard puton, a finish applied, and the hardware and electronics. Adam Quote Link to comment Share on other sites More sharing options...
Stiffy Posted November 7, 2005 Report Share Posted November 7, 2005 im selling an sg project, the body and neck were carved out of a single piece of mahogany. sg body link the body needs to be routed as wellas the neck, have a fingerboard puton, a finish applied, and the hardware and electronics. Adam ← Wow! Where you get that, or did you make that yourself? Quote Link to comment Share on other sites More sharing options...
TenderSurrender Posted November 7, 2005 Report Share Posted November 7, 2005 I cant tell you where but the auction description does tell you that he didnt make the entire thing himself, but he has done some work to it i bought this a few weeks back but i will not have time to finish it. .this is the original auction description: Here is a solid mohagony neck through SG style guitar, made with honduras mohagony so its very light. i have shaped the top of the neck and the volute, and on this model i shaped it with an extended cut away to eliminate the neck heel completely. you will need to finish shaping the neck, i left it to make it easier to install the truss rod and give more clamping area for the finger board. its cut for a 24 3/4 scale length. ~~ Slain Angel ~~ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.