sparky1 Posted March 19, 2006 Report Share Posted March 19, 2006 I just had to replace my serverely damaged body on my strat. the problem is the holes in my neck are just a bit off line with the new body making the neck run slightly down causing the high e string runs nearly off the bottom of the frett board near the 12th frett. its playable when we pull the neck to the top side of the neck pocket while tightening the 4 bolts down. the neck and pocket are fairly tight. what is the best way to keep the neck in position i thought of a shim at the but end of the neck on the high e corner to push the head end of the neck toward the low E. Quote Link to comment Share on other sites More sharing options...
Mickguard Posted March 19, 2006 Report Share Posted March 19, 2006 Fill the old holes and drill new holes. Quote Link to comment Share on other sites More sharing options...
sparky1 Posted March 19, 2006 Author Report Share Posted March 19, 2006 (edited) What is the proper procedure as far as over drilling holes for dowling and type of wood dowl and glue ect. Edited March 19, 2006 by sparky1 Quote Link to comment Share on other sites More sharing options...
gripper Posted March 20, 2006 Report Share Posted March 20, 2006 Probe the depth of the old holes with a nail or toothpick and drill 3/8" holes this deep but NO depper. Squirt some wood glue in the holes and rub some on 3/8" hardwood dowels slightly longer than the drilled depth. Force them all the way in and let set two days. Carve the ends flush with a VERY sharp flat wood chisel. Redrill new holes with the neck pushed over where you want it and assemble in reverse order. I guess. Guesses ROCK! Quote Link to comment Share on other sites More sharing options...
sparky1 Posted March 22, 2006 Author Report Share Posted March 22, 2006 thanks gripper thats about what i figured, just wanted to hear that voice of experience Quote Link to comment Share on other sites More sharing options...
mammoth guitars Posted March 22, 2006 Report Share Posted March 22, 2006 Use some quick wood to fill the holes. No pre-drill required. When you drill the new holes most of the filler will be removed anyway. Quote Link to comment Share on other sites More sharing options...
marksound Posted March 22, 2006 Report Share Posted March 22, 2006 Dowel and redrill. It's so simple and easy there's no reason to try shortcuts. Quote Link to comment Share on other sites More sharing options...
sparky1 Posted March 23, 2006 Author Report Share Posted March 23, 2006 drill and dowl it is. thanks again Quote Link to comment Share on other sites More sharing options...
whitey Posted March 23, 2006 Report Share Posted March 23, 2006 hey mamoth guitars quick wood is wood filler? what happens if a screw is threaded through,and it crumbles and sips out?or something like that? is it strong enough? Quote Link to comment Share on other sites More sharing options...
sparky1 Posted March 24, 2006 Author Report Share Posted March 24, 2006 Its an epoxy i beleave but im not gonna chance it the hard wood dowl will do fine the whole process took about 15 mins to drill with 3/8s and glue dowling in today ill clean up the over hang and refit the neck to this body probly another hour its worth the peace of mind. Quote Link to comment Share on other sites More sharing options...
mammoth guitars Posted March 24, 2006 Report Share Posted March 24, 2006 hey mamoth guitars quick wood is wood filler? what happens if a screw is threaded through,and it crumbles and sips out?or something like that? is it strong enough? Quick wood is a two part epoxy wood filler that becomes very hard and bonds to wood. It cuts, shapes and sands just like wood. We have never had it crumble or slip out. There are other wood fillers that come out of a tube like toothpaste that will crumble and fall apart. Quote Link to comment Share on other sites More sharing options...
whitey Posted March 24, 2006 Report Share Posted March 24, 2006 yeah,i was thinking of that lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.