blackmarketdonuts Posted May 31, 2007 Report Posted May 31, 2007 I'm modifying a guitar and I want to know what needs to be done in order to have LED's come on when it's dark using a light sensor. I also would like it to run through the guitar's power, when it's plugged in. Is this a possible dream I have? Any help would be much appreciated! Quote
thegarehanman Posted May 31, 2007 Report Posted May 31, 2007 (edited) If the guitar does not have a 9v battery in it for current electronics, then you will need to install one to power the leds. The only power traveling through the actual guitar cable is generated in the pickups by the vibrating strings which is far, far too small to power leds. As for having the leds turn on when it's dark, you'll need an LDR, and a relay along with some resistors and leds, of course. What does all this mean, you ask? It means you've got some googling to do. Edited May 31, 2007 by thegarehanman Quote
blackmarketdonuts Posted May 31, 2007 Author Report Posted May 31, 2007 Thanks, I suppose I do. Quote
thegarehanman Posted May 31, 2007 Report Posted May 31, 2007 Another tid bit to get you thinking: I don't know exactly what you're planning, but fiberoptics might be a wise choice depending on the application. There are even kits for sale that include the light source and a bunch of fiberoptic wire Quote
BNichols Posted May 31, 2007 Report Posted May 31, 2007 (edited) The electronic additions can be enabled with a stereo jack. wiring it correctly will not allow current to pass when there is no cable plugged in, while turning on your sensor and led's when there is a cable plugged in Edited May 31, 2007 by BNichols Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.