theyanchamp Posted June 13, 2007 Report Share Posted June 13, 2007 Is it possible to take an existing 'stock' pickup, and to add wounds to it to make it hotter or brighter? I have no experience winding etc, but I was wondering if it is extremely difficult to custom wind pickups using materials from the stock set? Quote Link to comment Share on other sites More sharing options...
black_labb Posted June 13, 2007 Report Share Posted June 13, 2007 it would be possible, but id suggest to just rewind it, but that depends on what you are using to wind it. if you are going to wind it by putting it onto a drill chuck or similar, then id do the whole thing, but if you were thinking of doing it by hand completely, then messing around with the soldering suddenly seems like an easy, not too time consuming job. Quote Link to comment Share on other sites More sharing options...
SwedishLuthier Posted June 13, 2007 Report Share Posted June 13, 2007 Most of what can be done with a standard pup is covered here: http://projectguitar.ibforums.com/index.ph...st&p=329778 Quote Link to comment Share on other sites More sharing options...
theyanchamp Posted June 14, 2007 Author Report Share Posted June 14, 2007 Thanks sweed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.