thebirthofcool Posted July 30, 2007 Report Share Posted July 30, 2007 I need the female threaded part of the two point fender classic players bridge system but I cannot seem to find them without buying the whole assembly. Anybody know where I can get this? I already have the screws but I would purchase them again if they came with the female parts. Also, what do I call this? Hight adjustment screw assembly? Quote Link to comment Share on other sites More sharing options...
zeppelinchld Posted July 30, 2007 Report Share Posted July 30, 2007 i have some extra strat bridge parts but i dont understand what u want Quote Link to comment Share on other sites More sharing options...
Bertbart Posted July 31, 2007 Report Share Posted July 31, 2007 How about a picture of what you need? Quote Link to comment Share on other sites More sharing options...
thebirthofcool Posted July 31, 2007 Author Report Share Posted July 31, 2007 (edited) How about a picture of what you need? Sorry, I realized I wasnt very clear. Ok...I have a two point tremolo off a classic player fender strat. There are two points wich mount into the body (hight adjustment screws) and hold the bridge in place. I have those screws. what I do not have are the female threaded sleeves wich you would incert into the body to accept the male. It looks like this: http://cgi.ebay.com/IBANEZ-ORIGINAL-EDGE-T...bayphotohosting accept this particular one is for an ibanez. As i said...i have the screws but need the other part. Thanks. Edited July 31, 2007 by thebirthofcool Quote Link to comment Share on other sites More sharing options...
GuitarGuy Posted July 31, 2007 Report Share Posted July 31, 2007 Do you have a drill press? you could make your own with some bar stock and a tap. Quote Link to comment Share on other sites More sharing options...
ToneMonkey Posted July 31, 2007 Report Share Posted July 31, 2007 I was about to suggest the same. Find some tube with the right dimensions and tap a thread into it. Quote Link to comment Share on other sites More sharing options...
mikevirok Posted July 31, 2007 Report Share Posted July 31, 2007 The piece you are looking for is called the threaded bushing. I know that StewMac carries a replacement FloydRose set of the bushings & screws, but it might not work on the Fender-style 2 point trem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.