darky Posted January 13, 2008 Report Posted January 13, 2008 hi, i've re-made my guitar wiring and as i have it all open i think about trying out some mods, and the one that caught my eye was the Series/single/parallel switching on this site(http://www.guitarnuts.com/wiring/sw3.php). the problem is that im not understanding the designations(a+/a-/b+/b-), this is suppose to be the wires coming from the humbucker but my pickup only has 3 wires, one white one red and other black! help needed Quote
RMS Posted January 13, 2008 Report Posted January 13, 2008 hi, i've re-made my guitar wiring and as i have it all open i think about trying out some mods, and the one that caught my eye was the Series/single/parallel switching on this site(http://www.guitarnuts.com/wiring/sw3.php). the problem is that im not understanding the designations(a+/a-/b+/b-), this is suppose to be the wires coming from the humbucker but my pickup only has 3 wires, one white one red and other black! help needed That schematic does not give you the full view so its a bit confusing, look at this site its so much better, keep in mind also some pups were not designed to be split three wire ones, others that are have 5 wires. diagram: http://www.guitarelectronics.com/product/WDUHH3T2206 look at another diagram all: http://www.guitarelectronics.com/category/...pickupdiagrams/ hope this helps! Rob Quote
pauseflash Posted January 17, 2008 Report Posted January 17, 2008 Sorry man, but you can't coil Tap off of a 3 wire without ripping apart the PUP and doing it yourself. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.