Cult Classic Posted December 7, 2008 Report Share Posted December 7, 2008 Hello all, Not been on here in a while but hello again. just bought another guitar.. which most of you would says is rubbish and a waste of money but i couldnt be happier with it to be fair. this is it... im just wondering. as its a replica it isnt exactly going to be like the real thing... what kind of things should i be doing to improve it? im new to guitars and dont want to embark on building one just yet! many thanks Jono. Quote Link to comment Share on other sites More sharing options...
Keegan Posted December 7, 2008 Report Share Posted December 7, 2008 Is that an Agile I see? You'll want to start with any buggy hardware, like if the tuners don't stay in tune, if the nut binds or open notes sound dead, if something in the bridge buzzes, if any frets buzz, etc. Once it's up to your standards of playability, move on to the electronics. If you're new to guitars, you probably won't know what kind of pickups you like, but if anything crackles or the controls don't work correctly you'll want to replace the components and rewire it. Cheap import electronics are good for learning to solder. After that, it's really up to you. You can try some new pickups, accessories, amps, pedals, whatever. Quote Link to comment Share on other sites More sharing options...
soapbarstrat Posted December 7, 2008 Report Share Posted December 7, 2008 If you're new to guitars, you probably won't know what kind of pickups you like.... And shouldn't dive into that until there's a good amp around. I was going to suggest that you have vinyl siding put on, but that might have only gone over well if I had been the first to respond. Hard to tell from a photo, what it could really need. Quote Link to comment Share on other sites More sharing options...
Keegan Posted December 7, 2008 Report Share Posted December 7, 2008 Haha. Hmm, wait, that's not the Agile or Epiphone horn, what the heck is it? Tokai? No, it's even pointier than that... Oh, and it probably needs a proper set-up and a new set of strings. Quote Link to comment Share on other sites More sharing options...
Cult Classic Posted December 7, 2008 Author Report Share Posted December 7, 2008 its a "liberty" Quote Link to comment Share on other sites More sharing options...
Mickguard Posted December 7, 2008 Report Share Posted December 7, 2008 Well, you're happy with it, right? So why change anything? I suppose all of us have our stock mods--things we do to a guitar as soon as we get it. Personally, the first thing I do is change tuners, because I like locking tuners, they're just easier to string up and are more stable. I eventually switch the nut, string tree, saddles, if they're a problem. If you like the way the pickups sound, keep them. The electronics on this type of guitar are often pretty cheap -- no point in replacing them until or if they crap out though. Otherwise, just give the guitar a good setup. You'll probably have to adjust the action at the nut. But if you're not familiar with setting up a guitar and aren't interested in learning, then take it to a tech -- a good setup can really change the way a guitar feels. Quote Link to comment Share on other sites More sharing options...
Cult Classic Posted December 7, 2008 Author Report Share Posted December 7, 2008 im interested in learning how to do work myself. i know the classic mini (the car) inside out thanks to months on another forum, so im looking to learn things here if i can. what does "setting up" involve? p.s i havnt got the guitar yet, it should arrive around tuesday onward. Quote Link to comment Share on other sites More sharing options...
Keegan Posted December 7, 2008 Report Share Posted December 7, 2008 Basically it's setting the action(distance from string to fret) as low as possible without buzz, getting the relief(bow in the neck) correct, and making sure the intonation is correct(making minor adjustments to the length of each string at the bridge so that the note at each fret is correct). They all affect each other, so if you change one, you have to change them all(not to mention retune the strings), and the trick is to get them all in balance and as playable as possible. There's also pickup height, but it's in its own category really. Closer to the strings = more output, less sustain(because the magnets pull on the strings). Farther = less output, more sustain. There's a basic tutorial on the main page: http://www.projectguitar.com/tut/tutorial1.htm There are also some tutorials here in the forum, a good one is this: http://projectguitar.ibforums.com/index.php?showtopic=39115 It only covers action and relief though. Quote Link to comment Share on other sites More sharing options...
Cult Classic Posted December 7, 2008 Author Report Share Posted December 7, 2008 thanks for that keegan. be prepared for more noob questions in the future! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.