angussg Posted January 16, 2009 Report Share Posted January 16, 2009 I have just sprayed a few coats of minwax poly and it comes out in very thick amounts. Whats the best way to get a good look out of it. ( how to get it glass like) Quote Link to comment Share on other sites More sharing options...
foil1more Posted January 16, 2009 Report Share Posted January 16, 2009 My friend finished a strat body over the course of a few weeks with minwax poly. He sprayed very thin coats of poly. Then he wet-sanded and buffed. If it is going on thick play around on some scrap with different distances from the wood and the speed that you move the can. The thinner the coats, the easier it will be to get shiny. Quote Link to comment Share on other sites More sharing options...
angussg Posted January 18, 2009 Author Report Share Posted January 18, 2009 (edited) Well now that i have finished applying how long should i wait to wet sand/buff? And also what grit should i start at? Edited January 18, 2009 by angussg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.