cncbcncb Posted January 30, 2009 Report Posted January 30, 2009 does anybody know the exact dimensions for the followind guitars: jackson king v rhoads kelly all i'm looking for is the max lengths and widths for just the body portions. (i.e. as in maximum x and y dimensions) thanks guys. Quote
postal Posted February 20, 2009 Report Posted February 20, 2009 RR- upper wing 21 1/4" long x 9 1/2 wide lower wing 17 1/2 long 6 7/8 wide Kelly- upper 17 3/4 long x 8 9/16 wide lower 17 1/2 long x 7 3/16 wide My templates were copied off of jacksons actual working templates at the factory in corona. I didnt copy a KV, but I just started a KV and simply used two large wings from the RR. I dont know if its a correct size for KV- but sure appears correct. I do have the doubleneck KV template but its of no use to try and recreate a KV with it- too different in the center sections- I think the only other jackson templates I have are soloist and demon... so other people reading this dont go asking for the "world".... Mine are only on paper and MDF so I cant provide any files or plans either. Quote
ihocky2 Posted February 20, 2009 Report Posted February 20, 2009 The V that Robin Crosby played was a double RR, with both wings the same size as the RR top wing. When Jackson designed the King V, that was the basis, but they did shrink the wings a little. I am not sure of the actual dimensions though. Quote
postal Posted February 21, 2009 Report Posted February 21, 2009 By the way, The width measurements are from centerline of course. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.