Bmth Builder Posted March 23, 2010 Report Share Posted March 23, 2010 (edited) Will this stain go under clear coats like nitro and poly? Its oil based, cleans up with white spirit. http://www.axminster.co.uk/src/froogle/pro...d-Dye-23110.htm Am I right in thinking that a water based stain might run if you then applied titebond to it, or if you then sprayed a water based top coat over it? Cheers! Edited March 23, 2010 by Neil Beith Quote Link to comment Share on other sites More sharing options...
killemall8 Posted March 23, 2010 Report Share Posted March 23, 2010 I dont know about the stain, depends. But... Why would you apply glue to something AFTER its stained? Quote Link to comment Share on other sites More sharing options...
Bmth Builder Posted March 24, 2010 Author Report Share Posted March 24, 2010 Just something waterbased over a waterbased stain, You might stain something then glue it for a pin stripe affect... Quote Link to comment Share on other sites More sharing options...
Woodenspoke Posted March 24, 2010 Report Share Posted March 24, 2010 I am not sure what you are talking about with the glue and striping so I will just answer the basic question. First those are furniture Dyes not usually used for guitar work. Mostly because they are not bright enought nor do they come in guitar colors. Very few guitars look like a piece of stained furniture.. That being the case anything can be used with another incompatible product by adding a compatible layer between them. In most cases this is shellac. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.