guitarnut Posted August 5, 2010 Author Report Share Posted August 5, 2010 This is looking fantastic so far; love the design and the top you've got.. It's gorgeous. Can't wait to see more work on this one. Cheers and good luck. Spencer Thanks Spencer. I haven't done anything more on this one. The weather isn't cooporating. The temp in the shop last night was 100F at almost 9pm. I don't have the outside temp sensor setup yet but it was probably around 105F heat index. The local football teams are practicing indoors because the heat index on the fields is approaching 120F. It's gotta break soon. I don't remember a more uncomfortable summer in recent years. Stay cool! Mark Quote Link to comment Share on other sites More sharing options...
s2p2e Posted August 5, 2010 Report Share Posted August 5, 2010 This is looking fantastic so far; love the design and the top you've got.. It's gorgeous. Can't wait to see more work on this one. Cheers and good luck. Spencer Thanks Spencer. I haven't done anything more on this one. The weather isn't cooporating. The temp in the shop last night was 100F at almost 9pm. I don't have the outside temp sensor setup yet but it was probably around 105F heat index. The local football teams are practicing indoors because the heat index on the fields is approaching 120F. It's gotta break soon. I don't remember a more uncomfortable summer in recent years. Stay cool! Mark Wow, that's pretty ridiculous.. I don't blame you for holding off on it. It's hot here, but not quite that hot; it gets around 95 . Hope the weather starts behaving soon! Ditto. Spencer Quote Link to comment Share on other sites More sharing options...
HenryM Posted August 5, 2010 Report Share Posted August 5, 2010 I have always liked your builds and I realy dig that headstock shape. We had 37 celssius outside last week and some 30 inside. Quote Link to comment Share on other sites More sharing options...
Juntunen Guitars Posted August 6, 2010 Report Share Posted August 6, 2010 This is looking fantastic so far; love the design and the top you've got.. It's gorgeous. Can't wait to see more work on this one. Cheers and good luck. Spencer Thanks Spencer. I haven't done anything more on this one. The weather isn't cooporating. The temp in the shop last night was 100F at almost 9pm. I don't have the outside temp sensor setup yet but it was probably around 105F heat index. The local football teams are practicing indoors because the heat index on the fields is approaching 120F. It's gotta break soon. I don't remember a more uncomfortable summer in recent years. Stay cool! Mark Where are you from that it's that hot? I thought it was hot here in northern Minnesota at 85 degrees. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 6, 2010 Author Report Share Posted August 6, 2010 Where are you from that it's that hot? I thought it was hot here in northern Minnesota at 85 degrees. SW Indiana. I moved up here from Texas thinking I would get a break from the heat. And I guess it is a bit of a break...in West Texas we had air temps of 115 from time to time. But it was a dry heat. The high for today is only 88F, so I'm thinking of ducking out of the office early today and working into the evening. It's gonna get hot again next week but only in the mid 90s. Peace, Mark Quote Link to comment Share on other sites More sharing options...
StormLeader Posted August 7, 2010 Report Share Posted August 7, 2010 Where are you from that it's that hot? I thought it was hot here in northern Minnesota at 85 degrees. SW Indiana. I moved up here from Texas thinking I would get a break from the heat. And I guess it is a bit of a break...in West Texas we had air temps of 115 from time to time. But it was a dry heat. The high for today is only 88F, so I'm thinking of ducking out of the office early today and working into the evening. It's gonna get hot again next week but only in the mid 90s. Peace, Mark Hahaha, I live in SW Indiana as well. Down in the Tri-state area, almost into KY. It was really hot that day, I was out mowing somebody's lawn in the heat. -Stormy Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 7, 2010 Author Report Share Posted August 7, 2010 Hahaha, I live in SW Indiana as well. Down in the Tri-state area, almost into KY. It was really hot that day, I was out mowing somebody's lawn in the heat. -Stormy] I'm in Evansville...that's as close to KY as it gets. Quote Link to comment Share on other sites More sharing options...
StormLeader Posted August 7, 2010 Report Share Posted August 7, 2010 Hahaha, I live in SW Indiana as well. Down in the Tri-state area, almost into KY. It was really hot that day, I was out mowing somebody's lawn in the heat. -Stormy] I'm in Evansville...that's as close to KY as it gets. Hahahhahahahahah, as am I! Evansville really is almost in KY, my sister always says we have more in common with Henderson than we do with the rest of Indiana. -Stormy Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 7, 2010 Author Report Share Posted August 7, 2010 Well, the AC in the shop is keeping a relatively cool 80F so I got a chance to get started on this today. First thing was to rough cut the top and body. I trimmed them fairly close to the template lines to reduce the risk of tear out during profiling with the router. I'm a bit concerned about the color variations in this maple. You can see on the edge that will eventually be the faux binding, there's going to be a change from light to dark. I think I may go with a honey amber finish to reduce the contrast at the edges...just have to wait and see. I wanted to get them cut and weigh them. Glad I did...the two together weigh in at over 8 lbs. So this baby getting chambered. No f-hole, just some wieght reduction. I was going to just profile the body on the belt/spindle sander but and route the top to match but since I'm chambering, I have to make a template. So, I did. Here it is just after hogging out the middles with a forstner bit and hand drill. And after smoothing it out on the spindle sander. It just needs a bit of hand blocking and it's ready to go. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 7, 2010 Author Report Share Posted August 7, 2010 Since I was going to be doing more routing than I thought and since I've been meaning to do it anyway, I took the time to make a vacuum box. Just a simple MDF box. With the back and sides assembled, I sealed it up with caulk. Then I drew out a rough 1" grid and drilled every other cross point and offset each row...forgot to take a picture after drilling. I borrowed the collection fitting from my band saw...it's sealed in with electrical tape so it pops back out for use on the band saw. Standing on edge with my dust collector attached and running, I'd say it's working pretty well. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 7, 2010 Author Report Share Posted August 7, 2010 So, back to all that routing I need to do. The body back by itself wighs in at a touch over 5 lbs. to start. I normally hog out most of the chambers with a forstner bit but I wanted to put the vacuum box thru it's paces. It works great! I may need to vent it on the side to let the DC work a little better...when I lean into it with the router, the body can slip a hair. Nothing scary, just not fully locked down. I don't normally exert that much lateral force but I wanted to test it's holding power. My camera batteries were down so I didn't get a pic of the scale after chambering but it weighed in at 3.028 lbs. Shed 2 lbs the easy way. It's chambered, profiled and ready for the top. I taped the top to the back of the body and ran the glue side thru the planer just to level it out. I did this to the body also before chambering it. So, all laid out and ready to glue up the top. Clampzilla!!! More soon... Peace, Mark Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 8, 2010 Author Report Share Posted August 8, 2010 While I was waiting on the body to set up, I got started on the neck. One of the things I've wanted to do is build a jig for my scarf joints. There's been quite a bit of discussion in the forums lately so I thought I would give it a shot. My best option is my band saw. It has plenty of height and has proven itself to cut straight thru many resaw operations. I started by building a sled that's guided on both edges of the table. Since the table is a custom setup, it doesn't have a slot for a miter guage so I had to rely on the edges. Then I marked a line down the center that marks the blade path. I laid out a scarf joint on a mahogany blank and lined the diagonal line front and back on the blade path line. Then I drew out a line along the back of the blank that gave me my reference for the fence. Attached a piece of ash from the bottom making sure to countersink everything so nothing would drag or hang up as the sled moved. The first pass thru the saw cut the blade path and angled the end of the ash fence. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 8, 2010 Author Report Share Posted August 8, 2010 After the first pass with the jig. I rushed the cut a bit. Feeding it slower will yield a smoother cut. After a bit of sanding on the belt sander...nice flat joint. I'm glad this worked out so I didn't have to use a hand plane. I used one on my PRS build by it wasn't much fun. With the body out of the clamps I trimmed up the top and got rid of any router bearing marks with a quick pass on the belt sander. On to the neck pocket and carve tomorrow. Peace, Mark Quote Link to comment Share on other sites More sharing options...
Juntunen Guitars Posted August 8, 2010 Report Share Posted August 8, 2010 Looking good. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 9, 2010 Author Report Share Posted August 9, 2010 While I had the scarf joint jig set up, I ran a few more necks. I took my time and eased the stock thru and got a very smooth cut. I think just a touch up on the belt sander and these will be good to go. I also made my neck pocket template. It was pretty easy once I figured out I wanted the 21st fret at the end of the pocket. Some quick calculations and I was ready to go. My neck tenon will be 1.625" beyond te end of the neck/fretboard, completely under the neck pickup route. I left .375" below the pocket. I'm thinking that's a good thickness to have there making the total thickness of the heel, neck and fretboard 1.750". Or to break it down, .750" tenon, .750" neck and .250" fretboard. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 9, 2010 Author Report Share Posted August 9, 2010 I moved on to the first steps in the carve by angling the top. The area from just in front of the bridge out to the neck pocket needs to be angled at 4 degrees to match the neck angle. I used a modified version of a router sled to do this. The body is set on the table a 4 degree rise and the router is suspended overhead. The clamps on the far left and right guide the router in straight lines across the body. After 2 passes from the zero cut line just in front of the bridge location. About half way thru. When I reached the end of the neck pocket, I shimmed the back of the body level with the front and finished it off at the same level. This will leave more material for for the carve on the horns. With the cutting completed you can see the gentle slope toward the neck pocket. Time for the fun stuff!!! Carving! Peace, Mark Quote Link to comment Share on other sites More sharing options...
Juntunen Guitars Posted August 9, 2010 Report Share Posted August 9, 2010 The top looks good. Did you choose a color yet? Quote Link to comment Share on other sites More sharing options...
jimmy g Posted August 9, 2010 Report Share Posted August 9, 2010 I love watching you work. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 9, 2010 Author Report Share Posted August 9, 2010 The top looks good. Did you choose a color yet? I haven't decided yet. There are a couple of issues and it's just me being ultra picky on this one but, the edge of the maple cap varies from light to dark where the faux binding will be so I was thinking a deep amber would reduce the contrast at the binding edge so maybe it wouldn't be so obvious. Then I started the pre carve work yesterday and see now that the lighter wood color is intruding slightly into the top and the two pin knots I hoped would carve out, appear to be too deep, so a dark color would be better to deal with these issues. I'll just have to wait until the carve is done to see which issue needs more attention. Peace, Mark Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 9, 2010 Author Report Share Posted August 9, 2010 Since I ended up chambering the body to reduce it's weight, doing a tummy cut on back isn't an option anymore. So here's an updated look for the back without the cut and with a larger radius on the edges. I also tweaked the control cover. Peace, Mark Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 15, 2010 Author Report Share Posted August 15, 2010 I braved the hot temps in the shop just because I was frustrated with not getting anything done. It was unpleasant but I made some good progress. I decided to start on the scarf joint so it would be setting up as I worked on the body. The use of the band saw jig I made really paid off. I marked a couple of pencil lines as a guide and with some 80 grit on a piece of 3/4" MDF, I blocked out the back side of the joint. It only took 15 of 20 secs to level it out. I then followed with some 220 which I have stuck to the other side of the MDF. I use a gluing method that clamps the main part of the neck to the bench on it's edge. Then I clamp a block of scrap to the bench that keeps the upper part of the joint in place. All that's left is to apply glue and clamp it up. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 15, 2010 Author Report Share Posted August 15, 2010 This process for the scarf joint worked very well and I went ahead and glued up 3 more mahogany blanks thoughout the day plau a couple of maple blanks for the ash top projects I have coming up. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 15, 2010 Author Report Share Posted August 15, 2010 In between gluing up neck blanks, I worked on the body. First step was to do a pre carve. I used an overhead router setup to do this. I trimmed out the carve portion of my full sized printout and traced it onto the body. The router works by using a tongue that sets the width of the cut and the depth is set by the router. After the pre carving. Each step was made by advancing the bit and retracting the tongue.. Quote Link to comment Share on other sites More sharing options...
guitarnut Posted August 15, 2010 Author Report Share Posted August 15, 2010 For the carving I decided to do a video series. It's more demonstrational than informational but hopefully there's some usable info. About 35 mins between the 3 vids. Excuse all the sweating...it was HOT out there. Part 1 Part 2http://www.youtube.com/watch?v=hYLIsC4R4ikhttp://www.youtube.com/watch?v=hYLIsC4R4ik Part 3http://www.youtube.com/watch?v=qHopuF1iTekhttp://www.youtube.com/watch?v=qHopuF1iTek Peace, Mark Quote Link to comment Share on other sites More sharing options...
crow Posted August 16, 2010 Report Share Posted August 16, 2010 For the carving I decided to do a video series. It's more demonstrational than informational but hopefully there's some usable info. About 35 mins between the 3 vids. Excuse all the sweating...it was HOT out there. Part 1 Part 2http://www.youtube.com/watch?v=hYLIsC4R4ikhttp://www.youtube.com/watch?v=hYLIsC4R4ik Part 3http://www.youtube.com/watch?v=qHopuF1iTekhttp://www.youtube.com/watch?v=qHopuF1iTek Peace, Mark Good work, but would not be plainer to skimp with a chisel then what to adjust the plastic surgery nicely with a plane? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.