aesache Posted September 21, 2010 Report Share Posted September 21, 2010 OK so i messed up as you can see I managed to forget to stop at the neck when i rounded the edges how do i fix this the (bolt on neck) mounting screw plate sits over the rounded edge. i dont want to scrap this build if i can help it as i went out and found a tree cut it down milled the wood etc... even worse i did this on both sides! Quote Link to comment Share on other sites More sharing options...
pauliemc Posted September 21, 2010 Report Share Posted September 21, 2010 no problems. Just use ferrules instead of a plate. something like these http://www.stewmac.com/shop/Hardware,_part...g_Ferrules.html except from evilbay or somewhere. Stewies are a bit pricey. Quote Link to comment Share on other sites More sharing options...
ihocky2 Posted September 21, 2010 Report Share Posted September 21, 2010 Ferrules are a great fix. You could also recess the plate and blend in the round over and call it a feature. Quote Link to comment Share on other sites More sharing options...
aesache Posted September 21, 2010 Author Report Share Posted September 21, 2010 i like both sugestions i would not have thought of either. Thanks all! now i can say i meant to do that Quote Link to comment Share on other sites More sharing options...
Bmth Builder Posted September 21, 2010 Report Share Posted September 21, 2010 I prefer the look of ferrules, I'de probably shape the heel even more to a more Ibanez AANJ style shape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.