jaxso32 Posted December 8, 2012 Report Share Posted December 8, 2012 Recently saw on instructables crushed rock used as an inlay on rings http://www.instructables.com/id/Bent-Wood-Rings/#step1 and had the idea of using it on my fretboard. Any idea if this would work? Quote Link to comment Share on other sites More sharing options...
verhoevenc Posted December 8, 2012 Report Share Posted December 8, 2012 People have used inlace before. Grizzly even sells it. Personally, I'd still prefer to cut and route traditional inlay. If you're just looking for the COLOR, and don't care about the "I drill a hole and just put the stuff in it and I'm done" aspect, then check out MaseCraft Supply. They sell something called recon stone. Much better finished product, IMO. Chris Quote Link to comment Share on other sites More sharing options...
jaxso32 Posted December 9, 2012 Author Report Share Posted December 9, 2012 i still would route out a design not just a dot but that was the main reason for the color so itd be something other than the normal color inlays Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.