ProjectGuitar.com Posted September 24, 2013 Report Share Posted September 24, 2013 The Project Guitar.com "Guitar of the Month" contest is a showcase for all the members, so show us your axe in this thread! This contest is open to any and all members that enter and will be continued each month for a place showing your creation on the homepage! The winner(s) of course will have his/her guitar featured on the homepage of Project Guitar.com and if you have a website the picture will link directly to it if you so choose (even commercial site's). If your a forum member you will also be upgraded with a special badge to show you won! So show us your creation in this thread! You've got till sometime around the 23rd or 24th of October then this thread gets locked and the voting starts! Any Post that is not an entry will be deleted, feel free to start a new thread to discuss any guitar entered this month There may be more then one poll to determine winners in different catagorys at the end of this contest! Please post a maximum of your 4 best pictures per guitar entered Make sure Your Guitar has a Name or Nick Name as well otherwise one will be given to it Side note, if you are unable to post a picture you can e-mail one to Brian and it will be posted for you, or ask forum members how to post pictures, they are very helpful. Link to comment Share on other sites More sharing options...
crow Posted October 8, 2013 Report Share Posted October 8, 2013 B l a c k C r o w body: mahagany back, maple top neck: mahagany fretboard: ebony scale: 25,5" frets: 24 pickups: PRS DRAGON II tuners: PRS bridge: Shaller floyd finish: polyester primer coating, acryl topcoat Link to comment Share on other sites More sharing options...
bigdguitars Posted October 20, 2013 Report Share Posted October 20, 2013 Howdy folks been a long time since I have posted still lurk in the background everyonce in a while. This guitar has been 2 years in the making, its for #3. She was born a year and a half ago so I finally got around to finishing it. Les Paul Burl Top Rosewood board, gold shell inlays, flame maple neck binding, red burst top, 1 piece back, and one piece neck. Finished in sanding sealer and about 10 coats of tru-oil. No pore filling, really dislike doing that. 4-ply plastic binding on the body. I tried with the maple I could not get it to bend. Guitar does sound great here are the pics. My neck build process: My body build process: Link to comment Share on other sites More sharing options...
mefgames Posted October 22, 2013 Report Share Posted October 22, 2013 Say Hello to Burl. Clear Nitro on an Ash body with a Redwood Burl top, Maple neck with a 25 1/2 scale Rosewood Fingerboard with ebony fret markers. Seymour Duncan Trembucker bridge and SH-2 Jazz neck. Push/pull pots with 3 way mini switch. Sperzel Locking tuners and a Schaller Non-Trem Bridge. Link to comment Share on other sites More sharing options...
whalehazard Posted October 23, 2013 Report Share Posted October 23, 2013 Andromeda 24 3/4" scale 24 frets One piece Fijian Mahogany body Quartersawn cherry neck East Indian Rosewood fretboard and headplate East Indian Rosewood and white fiber binding Pearloid, Mahogany and Canarywood inlay Gotoh tuners Gotoh 510 wraparound bridge Seymour Duncan Alnico II Pro neck Seymour Duncan Custom Bridge Build thread! http://projectguitar.ibforums.com/topic/46666-two-builds-at-once-new-design/ Link to comment Share on other sites More sharing options...
Recommended Posts