mairj40 Posted February 16, 2016 Report Posted February 16, 2016 I have an OLP Coffin guitar that I am trying to rewire. I followed the diagram below, but there is no sound when the 3 way switch is in the middle position, and the tone does not seem to work. Is this an incorrect diagram? It has two humbuckers with a one volume and one tone control with a 3 way blade switch. Quote
curtisa Posted February 16, 2016 Report Posted February 16, 2016 Diagram is correct. Tone pot not working - check you have connected the cap/tone pot case to ground. Middle position on switch not working - check you've installed the bridges on the upper-left pair of lugs and the lower-right pair of lugs on the switch as per your diagram. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.