Ace Posted January 26, 2004 Report Share Posted January 26, 2004 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...&category=38082 so long ace Quote Link to comment Share on other sites More sharing options...
Scott Rosenberger Posted January 26, 2004 Report Share Posted January 26, 2004 I've toyed with the idea of buying one of his inlayed fingerboards before, but the quality of the photos in his auctions just make me a little suspicious of the quality Quote Link to comment Share on other sites More sharing options...
Guest AlexVDL Posted January 26, 2004 Report Share Posted January 26, 2004 I said the same on the other thread about the fretboards... I too have ordered some of his stuff.. but because his fretboards suck, you have to radius it again properly (it isn't straight either) His inlay material is like LGM said very very thin... some of his abalone is 1 or 2mm thick, but his MOP is thinner than a piece of paper... that's why I don't dare to radius the fretboard further... In person the works don't look good.. he just uses big pieces of shell and scrape the lines in. That looks much less proffessional than using several different pieces. IMO, don't buy the pre-inlaid fretboards!! Too much work to get them ok, and you risk sanding thru the inlays!!! His DIY inlays are great though.... so if you don't mind routing it yourself, try one of those and specifically ask for thick pieces!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.