avengers63 Posted January 12, 2023 Report Share Posted January 12, 2023 Does anyone have a full sized template of a hockey stick neck? I've been looking all over, and they don't exist at a reasonable price, IF they can be found at all. I was hoping someone here would have one they'd be willing to run off a copy of for me. Of course, I'd pay for the MDF & shipping. Also, if anyone has a good pointy headstock template also, that'd be fantastic. Quote Link to comment Share on other sites More sharing options...
ghostdive Posted January 12, 2023 Report Share Posted January 12, 2023 I can get started drafting a file, either to print or to have laser cut. I'm not so good at making templates by hand yet. What nut width, and do you want tuner holes included? Quote Link to comment Share on other sites More sharing options...
nakedzen Posted January 13, 2023 Report Share Posted January 13, 2023 Any reason why not print the template and glue that to the mdf? I'm sure with your skills you can make the template. https://www.electricherald.com/gibson-explorer-guitar-templates/ Quote Link to comment Share on other sites More sharing options...
avengers63 Posted January 13, 2023 Author Report Share Posted January 13, 2023 I use a 43mm nut. Yes, the tuner holes would be a big plus. Yes, I absolutely CAN make the template. I don't want to. It's a pure value judgment. I'd rather pay someone to run me off a copy than to spend the hours needed to do it myself. Quote Link to comment Share on other sites More sharing options...
avengers63 Posted January 17, 2023 Author Report Share Posted January 17, 2023 To hell with it. I am just gonna make my own. I've just been making more work for myself for years anyway. I make a LOT of 6IL headstocks. Just about all of my headstocks are tiltback/scarf. They're just plain more work than necessary. I end up screwing with the scarf joint for 2-3 days because I never made the proper jigs. There's absolutely NO reason all of the 6IL headstocks can't be a 1-piece neck and just use string retainers. Work smart, not hard... dumbass. I actually had to make the first plan twice. I always use a zero fret, and I didn't add the 3/16" extra to take the zero & nut into account. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.