Jump to content

curious for the electronics for the acoustic

Recommended Posts

  • 3 weeks later...

There are several types. The one I just installed into the Giannini referenced elsewhere has a microphone, an under-saddle piezo pickup, and a blending pre-amplifier which gets mounted to the side of the guitar. This requires a hole to be made in the bottom of the saddle slot to feed the wire from the piezo, a hole in the end block for the 1/4" jack, and a hole to be cut into the side of the guitar to mount the pre-amplifier/control unit.

A simple under-saddle piezo without preamp would still need the 2 holes at the saddle slot for the piezo wire and the end block for the jack. Boggs

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...