GOG427

damnit you make me so mad.... i cant do any of that ,i curse you by all means......oh nice guitar

can someone give me as site to buy oil can AFRI-CAN guitar acuostic left handed in american money plz

ok i'm noob but here it goes.. 1.cut out and sand you body{guitar body} 2.use wood filler if needed let dry sand even and smooth 3.use sand sealer for sure ..let dry then use 300 to 400 grit sandpaper and sand away all shinny spots dont go thur sealer{or try not to}make all smooth and not shinny.. 4.primer if need promer is so wood grain doesnt show thur paint and less base coat paint is needed..let dry sand with 400 to 600 grit 5.apply base coat try not to do any sanding if practice paint it want be needed 6.anything else needed befor clear coat likew other colours{whatever} 7.apply clear coats{like 15 or more} then sand with WET sandpaper from 400,600,800 all way up to 2000 grit {dont go thur the clear coat{this is why you use alot of clear coat} be sure to sand over each previus{sp} sand marks 8.buff and polish ... like i said i'm a nood if anyone else would like to add something or do a better step by step on paint plz do.. good luck and don't mess it up....

i always on go annd i cant take a full size guitar with me to alot of place ..so i thought it wood be cool to have a backpack guitar or build one more likly any ideas?

i love making it wah like little chubby pig,,,

all ones i have seen on here and other place are kinda lacking ..my friend who worked for nasa he drew up blueprints for paint booth in 5 min, 7 pages..i was like wow cost $200 ill have them posted in few days..once i get mine finish ill post pics then i want to do paint tutorial with pic from sanding of body to final buffing for poor-man ..should be fun to watch....ill be sure to put down everything i used down to last grian of sandpaper

in title says it all ..any ideas.. i have neck ready and sand sealed..

vox 847 already had cry baby it was ok morley wah boss pah

the only thing i found was strat in right or left ...ill send email. a guy on chatroom said only left on strat

nope i have no place any power tools all i have is paint booth and curse of being lefty...oh and yes still 4 screws

wow thx just need to make lefty i'm set

ok this may be long shot but warmoth want make a gibson sg body left handed if i was to buy the wood and pay all shipping is there any one on thos great forum who would cut me a left handed sg body and route it out ill pay ....

heres link i figure a mahogany neck with ebony would be nice ... oh how do there necks and bodys come with just sand sealer on them or what?

what did you look under on ebay? i been looking for an hour

sg printable template to trace on mahongany body ?

good god nice ..where did you get those templates

from reranch its how to sand sealer but doesn't say dry or wet or what grain of sand paper any ideas? "next apply a high solid content sand and sealer product. Parks Corporation makes a nitrocellulose product which fills this requirement nicely. The application is simple as the sealer can be brushed on. Brush on the first coat and allow to dry for a few minutes. When the surface is flat (non reflective) a second coat can be brushed on. Allow this double coat to dry at least an hour (I usually wait overnight). When dry the coats can be block sanded flat. I suggest that this sanding be done in an area where dust is not a concern. You will see why when you begin sanding. I also suggest that you wear a mask. When this two coat application has been sanded flat (no shiny spots) wipe down with a dry cloth, inspect again for shiny spots and repeat."

LGM GUITARS= LORD GOD MASTER OF GUITARS THX

above says it all

LGM promise nothing better

anyone ..

ok well i'm going to try and refinish this guitar its a sx cheap-o but body and neck are mahogany so figure it should come out nice i was going for olympic white and all gold hardware,,, how do i remove the hardware in guitar here its part of bridge

i'm in need of spray gun and compresser a breather of some type and any other stuff.. i only have $400? any ideas os suggestion i'm building a paint booth right now ill have tutorial in 2 weeks

wow nice man

thx,thank you ,gracias