Jump to content
Voting in Guitar of the Month April 2024 is now open! ×

King_Petrucci

Established Member
 View Profile  See their activity

  • Posts

    31

  • Joined

  • Last visited

 Content Type 

Everything posted by King_Petrucci

  1. King_Petrucci
    Got the floyd and the pup routs done today. One of the stud posts was off a little so i routed out that section and glued another block in. Ill redrill it tomorrow. Apart from that it went really well
  2. King_Petrucci
    Bit more work done today. Neck taper and neck pocket routed. Nice snug fit. Ill hopefully get the pup rout and floyd rout done tomorrow
  3. King_Petrucci
    Nice to see I'm not the only one who shows off the rough stuff. I love the look of this so far ! keep it rollin like this and you'll be holding a winner at the end. Thanks mate. Its coming along alrite so far. Im sure itll turn out real nice
  4. King_Petrucci
    I got a litte bit more done today. Finished off the binding on the fb, cut the neck taper and glued the fb down. I also thinned out the headstock on the bandsaw. I cut about 3mm off each side and then sanded it a little bit. Came out perfect.
  5. King_Petrucci
    Thanks stewey. Thats something ive been wondering about..wat kind of finish is applied to a bloodwood board? Ive never used them before..I now have 4 more sitting here but because i loved the look of this one so much
  6. King_Petrucci
    Cheers Muzz. The bandsaw makes such a difference in time and quality. Sure beats using a jigsaw lol. The veneer for the binding was a pain but. That stuff is annoying to work wit. Ill hopefully get the neck taper cut tomorrow and the fb glued on..
  7. King_Petrucci
    Time for a new build. I got my new bandsaw last week. I bought the carbatec CTJ3501 14" from sydney tools. I dont know how ive lasted this long with out one. Its got heaps of power and a nice big table and can resaw up to 200mm.. Now that the bandy is up and running, im starting a new build Mahogany neck and body Bloodwood fingerboard 27.5" scale Floyd rose Setneck Not sure on pickups just yet Just got the body routed, truss rod router, fingerboard is tapered and fret slots cut. I used .5mm black veneer and .5mm bloodwood veneer for the binding. The pics dont show it too well but it came up really good
  8. King_Petrucci
    Wheres the thread?? As the name suggests, Im a bit of a fan lol.. Thats a really nice build for a first go. Put my first to shame! Those measurements you gave could come in handy too!!
  9. King_Petrucci
    Sounds awesome mate. Killer tone! Old skool offspring rule..New offspring suck haha.. Redemption is a killer song! Its my go to song to wake up at work lol
  10. King_Petrucci
    Threads of Life cd!!!!! That CD is on heavy repeat for me! Aussie and a shadows fall fan!!
  11. King_Petrucci
    Good job Muzz. Thats one really clean guitar built by a fellow Aussie! Where abouts in Aus are you from?
  12. King_Petrucci
    Didn't you have problems with the paint Floody, my man?? Pics and an explanation please. HAHAHA look what the cat dragged in!!! Long time no see old man hahaha! I did have problems with the paint. It developed some cracking.. Never got a definitive answer as to why though..Still havent bothered to repaint it. It sure plays well but lol. So where have you been daddyo?
  13. King_Petrucci
    Welcome to the club. I dont use an eq at the moment and it sounds great..Having said that, I think ill buy one soon. I seem to be reading everywhere how good they are
  14. King_Petrucci
    I guess It was you I was talking about KP. You gotta finish up that thread man! Evidently you have the progress pics, at least show us the final result! What did you end up using for the bridge? Yea time sorta got away from me. It turned out ok in the end. I used a 7 string strat trem. I think I might block the trem but cos I dont like it..Ill try post final pics tonite...Wheres the progress on this one turtles???
  15. King_Petrucci
    Ive had mine for a year and had no problems at all..And its switchable between 6l6 and el34's..and 5 tubes in the preamp compared to only 4 in alot of amps..It really is a very ballsy amp! And the quality seems pretty high to me.
  16. King_Petrucci
    On the xiphos i built (the green one of first page) I roughed it using a flap disc on an angle grinder and the sanded..On my V before that, I used a rasp for all of it. Rasp is better in my opinion
  17. King_Petrucci
    Ive got the 6262. The bugera line is pretty much modeled after the peaveys. The 6262 is similar to a 5150..Alot of people actually say the 6262 is better..More bottom end. Apparently the 5150 has too much treble. I suggest you give one a try. Im sure you'll like it
  18. King_Petrucci
    Looking good Stewey!! Love that fretboard. Ive been thinking of trying something like that. Cant wait to see the carve progress
  19. King_Petrucci
    I could possibly get shot down for this but try a bugera valve head. I think they sell them in the states..Im from Australia and i got mine for $900. Its really nice on the cleans, has a mild distortion channel and then a lead for full blown metal. I play loads of metal through it and can tell you that u wont be disappointed!
  20. King_Petrucci
    Hey looking good man. Love the accent in the scarf joint. I love the xiphos too. I love every Ibanez actually lol. I made a Xiphos a while back. I cant seem to find a finished pic. Im sure yours will turn out better than mine. My timbers were crap as it was my second build.. Your neck looks sweet!!
  21. King_Petrucci
    I absolutely love your builds man. And i agree with i like turtles..This one is prob my favourite. Your choice of timbers are always awesome! Keep it up!
  22. King_Petrucci
    hahaha fancy seeing you here
  23. King_Petrucci
    hmm looks like no one is interested lol...oh well... I routed the body this arvo. Havent done the neck and pup rout cos i havent got my template yet. It turned out pretty good today. Way better than my first build!! Ill hopefully rout the truss rod tomorrow and stick the fb on. I will order a radius sanding block this weekend i guess so i can slot the board next week... Anyway here's a couple of pics of the body..
  24. King_Petrucci
    Hey guys. Time to start my second build. Ive always wanted a 7 string Xiphos but with the price tag, I thought id have a crack at building one. Body: Agathis Neck: Tassie Oak Fingerboard: East Indian Rosewood Scale: 25.5" Bridge: 7 String T-O-M Pups: 7 String 17.5 k (dont know brand) http://i625.photobucket.com/albums/tt331/k...rucci/parts.jpg http://i625.photobucket.com/albums/tt331/k...rucci/truss.jpg Its my first attempt at making a neck so hopefully it turns out. Ive been looking at the tutorials here and looking on google lots lol
  25. King_Petrucci
    Awesome guitar. Really well built and great colours too.. I like it even more cos its built by a dream theater fan!!!
×
×
  • Create New...