helge Posted August 20, 2004 Report Share Posted August 20, 2004 hi, does anybody have a ibanez 7 string headstock drawing?? need it to make a template. thanks. helge Quote Link to comment Share on other sites More sharing options...
STAHLER Posted August 20, 2004 Report Share Posted August 20, 2004 I only have a 6 string drawing, but if you enlarge it it might work ? At the nut on a 6 string it measurses 43mm, on a 7 string 48mm. So if you enlarge it all by 5mm it may look ok. You then just have to work out the string spacing. If you would like the drawing pm me. Quote Link to comment Share on other sites More sharing options...
Meegs666 Posted August 21, 2004 Report Share Posted August 21, 2004 an ibanez headstock is not that hard to draw, i think the thing that would help most is if someone could supply better measurements, like from the nut to the tip or the length of the tuner side. Quote Link to comment Share on other sites More sharing options...
Mike Doyle Posted August 21, 2004 Report Share Posted August 21, 2004 For the basic shape...I just went to the ibanez side and blew up one of their photos. I traced the outline on the screen, and then measured the nut width on the small version. I worked out a factor to multiply it by to get a 43mm nut width, and then redrew it accurately. Looks perfect to me. Do the same with the 7-string...it takes 30 minutes, but is well worth it....and 99% accurate anyway. Quote Link to comment Share on other sites More sharing options...
helge Posted August 21, 2004 Author Report Share Posted August 21, 2004 ok, i'll try it. thank you guys for the quick reply. Quote Link to comment Share on other sites More sharing options...
ELXVintagefade Posted August 22, 2004 Report Share Posted August 22, 2004 Can you post the 6 string drawing for me. PM will work too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.