mack10series Posted September 10, 2004 Report Share Posted September 10, 2004 in the tutorial for a trem to hard tail conversion, they used a big block of wood to fill in the hole of the trem cavity, could i do the same thing to block off my neck and middle single coil pickup cavities?(im tryin to make a 5150 style body) Quote Link to comment Share on other sites More sharing options...
Hotrock Posted September 10, 2004 Report Share Posted September 10, 2004 In a word "Yup" Hope it's going be painted though Quote Link to comment Share on other sites More sharing options...
MzI Posted September 10, 2004 Report Share Posted September 10, 2004 as hotrock said yes you can, someone on here actually did that use the search function to look up the thread bcuz there was quite a few photos in there and it would prolly be really helpful, also it was in the inprogress section MzI Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted September 10, 2004 Report Share Posted September 10, 2004 Here it is I can't believe that nobody else got it. http://projectguitar.ibforums.com/index.ph...ic=8589&hl=5150 This is a great tutorial for 5150's. Quote Link to comment Share on other sites More sharing options...
mack10series Posted September 10, 2004 Author Report Share Posted September 10, 2004 what about changing the bolt pattern, i have an ibanez rg and i want to be able to fit a kramer, or warmoth neck on the rg body, is there any way i can change the bolt holes on the body? Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted September 10, 2004 Report Share Posted September 10, 2004 Use your imagination, plug them and drill new holes, it shouldn't be a big deal if you are using a neck plate... But check the position before if you are using ferrules. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.