fishguts Posted October 17, 2004 Report Share Posted October 17, 2004 (edited) Hi everyone, I have a quick question. I won a strat off ebay and it needed a few things fixed. One of the things that I need to correct are the screw holes for the pickgaurd. The pickgaurd and the screw holes do not match, so what kinda tool would I need to drill them out? My dad is a carpenter so he probably has the tool, I just need to know what to use. Edited October 17, 2004 by fishguts Quote Link to comment Share on other sites More sharing options...
Executioner606 Posted October 17, 2004 Report Share Posted October 17, 2004 Perhaps a drill ? Just find a small enough bit for it. Quote Link to comment Share on other sites More sharing options...
!!METAL MATT!! Posted October 17, 2004 Report Share Posted October 17, 2004 His everyone, I have a quick question. I would go with a drill press you will have alot more control with that then with just a drill so good luck what iam I saying you must have some good luck you did win the guitar !!METAL MATT!! Quote Link to comment Share on other sites More sharing options...
westhemann Posted October 17, 2004 Report Share Posted October 17, 2004 i use a handheld black and decker cordless for that stuff..much easier to control than a big handheld and a drill press is kind of overkill for that shallow of a hole... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.