jay5 Posted April 12, 2005 Report Share Posted April 12, 2005 jer7440 turned me on to CME Tools as a source for end mills. I started browsing their site and found a 1 ton arbor press for $25! I will definately be adding this to my end mill order. Like all the other presses out there, you will need to drill out a hole in the ram and tap a set screw but for $25 I cant pass this up. Thanks again jer! Quote Link to comment Share on other sites More sharing options...
jer7440 Posted April 12, 2005 Report Share Posted April 12, 2005 glad to help Quote Link to comment Share on other sites More sharing options...
jnewman Posted April 12, 2005 Report Share Posted April 12, 2005 Yikes... I may be getting one of those myself, that's CHEAP! I don't really like hammering frets in. Quote Link to comment Share on other sites More sharing options...
Scott Rosenberger Posted April 12, 2005 Report Share Posted April 12, 2005 I've been using one of those for a few years now. Works every bit as well as the Stewmac press Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.