warnan Posted June 3, 2005 Report Share Posted June 3, 2005 how to solder the ground wire to bridge, every time the wire will unsolderd from the bridge. how u do this job? Quote Link to comment Share on other sites More sharing options...
Maiden69 Posted June 3, 2005 Report Share Posted June 3, 2005 file down the place that you want to solder the wire at. It need to be rough, and won't stick to shiny surface. And it need a lit of heat on the bridge too, so get it very hot before placing the wire. Quote Link to comment Share on other sites More sharing options...
westhemann Posted June 3, 2005 Report Share Posted June 3, 2005 what type of bridge?usually you don't solder to the bridge itself if it is a trem you solder to the claw,if iot is a t.o.m. you just place it in the insert hole,and if it is a standard hardtail strat style bridge you place the ground wire under the bridge(bare) and screw the bridge down Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.